GE JTP31SRSS Dimensions And Installation Information

Contents

undercounter installation

Dimensions and Installation Information (in inches)For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center® service,800.626.2000.320230Specification Created 5/10JTP31SRGE® 30" Built-In Single Wall OvenListed byUnderwritersLaboratoriesKW Rating240V 4.5208V 3.4Breaker Size240V 20 Amps208V 20 AmpsMost 30" Wall Cabinets can be used with this unit.Note: These ovens are not approved for stackableinstallations.Note: Cabinets installed adjacent to wall ovensmust have an adhesion spec of at least a 194°Ftemperature rating.Door handle protrudes 3" from door face. Cabinetsand drawers on adjacent 45° and 90° walls should beplaced to avoid interference with the handle.Installation Information: Before installing, consultinstallation instructions packed with product forcurrent dimensional data.Electric wall ovens are not approved for installationwith a plug and receptacle. They must be hardwired in accordance with installation instructions.Side-by-side installations require at least 2"between cutouts.Suitablbracinto supporunnerCutout width28-1/2'' MIN.28-5/8'' MAX.29-3/4C30Recommendedcutout location32-1/2"from floor21JunctionboxlocationAllow minimum of 21'' for clearanceto adjacent corners, drawers, walls, or etc.A=Allow 1" overlap of oven over top and bottom edges of cutout.B=Allow 11/16"–3/4" for overlap of oven over side edges of cutout.C=28-1/4" without trim and 28-3/4" with trim.Conduit48-1/2"527-1/4'' MIN.27-5/16'' MAX.Cutout heightAB23-1/2'' MIN.Cutout depth22'' MIN.CL 2 x 4 orequivalentrunnersSuitablebracingto supportrunners21-5/8"over centerlineof cabinet(must support 275 lbs.)ut width2'' MIN.8'' MAX.0Recommendedcutout location32-1/2"from floorJunctionboxlocations of cutout.ges of cutout.527-1/4'' MIN.27-5/16'' MAX.Cutout heightAB23-1/2'' MIN.Cutout depth22'' MIN.

/ 3

Related manuals for GE JTP31SR