GE JV535 Owner's Manual And Installation Instructions

Also see for JV535: Owner's manual and installation instructions Owner's Manual & Installation Instructions Owner's Manual & Installation Instructions Owner's manual and installation instructions Owner's manual and installation instructions

Contents

11REMOVE EXHAUST ADAPTORRemove the 7″ round exhaust adaptor from the top ofthe hood. Set it aside along with its mounting screws.7″ roundexhaustadaptorREMOVE FILTERSRemove the shipping tape holding the metal greasefilters in place. Pull down on the filter tabs and lift thefilters out. Set them aside.REMOVE BOTTOM COVEROn models so equipped, remove the bottom coverfrom the hood. Set the cover and its mounting screwsaside.Bottom cover(held in placewith 2screws)REMOVE OTHER EXHAUST ADAPTORRemove the 31⁄4″ x 10″ rectangular exhaust adaptorfrom inside the hood. Set it aside along with itsmounting screws and parts bag. Depending on themodel, the exhaust adaptor will be located on theleft or right side.31⁄ 4″ x 10″rectangularexhaust adaptor31⁄4″ x 10″rectangularexhaust adaptorREMOVE WIRING COVEROn models so equipped, remove the wiring coverfrom inside the hood. Set the cover and its mountingscrew aside.WiringcoverREMOVE WIRING KNOCKOUTRemove either the top or the back wiring knockout asneeded and install an approved strain relief clamp.Strain reliefclamp234567Installation InstructionsFilters