GE JVM1790SK - Profile 1.7 cu. Ft. Convection Microwave Installation Instructions Manual

Also see for JVM1790SK - Profile 1.7 cu. Ft. Convection Microwave: Owner's manual Service manual

10ALIGNING THE WALL PLATEDraw a vertical line on the wall at the center of the30″ wide space.Use the mounting plate as the template for the rearwall. Place the mounting plate on the wall, makingsure that the tabs are touching the bottom of thecabinet or the level line drawn in Step C for cabinetswith front overhang. Line up the notch and center lineon the mounting plate to the center line on the wall.While holding the mounting plate with one hand,draw circles on the wall at holes A, B, C and D (seeillustration above/actual plate marked with arrows).Four holes must be used for mounting.NOTE: Holes C and D are inside area E. If neitherC nor D is in a stud, find a stud somewhere in area Eand draw a fifth circle to line up with the stud. It isimportant to use at least one wood screw mountedfirmly in a stud to support the weight of the oven.Set the mounting plate aside.Drill holes on the circles. If there is a stud, drill a 3⁄16″hole for wood screws. For holes that don’t line up witha stud, drill a 5⁄8″ hole for toggle bolts.NOTE: DO NOT MOUNT THE PLATE AT THIS TIME.234Draw a VerticalLine on Wallfrom Center ofTop CabinetArea EHole AHole BHole DHole CD.Installation InstructionsCAUTION: Wear glovesto avoid cutting fingers onsharp edges.1