GE JVM1790SK - Profile 1.7 cu. Ft. Convection Microwave Installation Instructions Manual

Also see for JVM1790SK - Profile 1.7 cu. Ft. Convection Microwave: Owner's manual Service manual

AFTER: Fan BladeOpenings FacingForward324ADAPTING BLOWERFOR RECIRCULATIONC3.20NOTE: The exhaust adaptor with damper is notneeded for recirculating models. You may want tosave them for possible future use.Carefully pull out the blower unit. The wireswill extend far enough to allow you to adjust theblower unit.Roll the blower unit 90° so that fan blade openingsare facing toward the front of the oven.RollSlide the blower plate from under its retainingflange and lift it off. Remove and save screw thatholds the blower motor to oven.Remove and save screws that hold blower plate tothe oven.NOTE: Make sure wires remain routed in thegrooves of the motor frame.Installation InstructionsBEFORE: Fan BladeOpenings Facing Up1Back ofOvenBlower Plate ScrewsBlower PlateBlower MotorScrewRetainingFlange