GE JX827 Installation Instructions Manual

Also see for JX827: Installation instructions

Contents

GE JX827 Installation Instructions Manual Manual pdf 1 page image

Installation Microwave OvenInstructions Built-In Trim Kits1❒ BefOre YOu BegInread these instructions completely and carefully.• IMPOrTAnT — Save these instructionsfor local inspector’s use.• IMPOrTAnT — Observe all governing codes andordinances.• note to Installer – Be sure to leave these instructions withthe Consumer.• note to Consumer – Keep these instructions for futurereference.• Skill level – Installation of this appliance requires basicmechanical and electrical skills.• Completion time – 1 to 3 hours• Proper installation is the responsibility of the installer.• Product failure due to improper installation is not coveredunder the Warranty.• This kit is for use on models:PEM10SFC, PEM10BFC, PEM10WFC and CEM11SFC• Do not alter or modify any part of this kit or the oven.• For easier installation and personal safety, werecommend that two people install this microwave oven.• Unplug the microwave oven before attempting installationof this kit.WArnIng — This oven must be plugged into aproperly grounded 3-hole, 120 volt receptacle as required bythe National Electrical Code.Questions? Call 1-800-561-3344 or Visit our Website at: geAppliances.caPArTS InCludedPArT QuAnTITY❒ Base Pan 1❒ Rail 2❒ Trim Kit 1❒ 4 mm x 10 mm 11 requiredScrew A 3 extra❒ 4 mm x 16 mm 4 requiredScrew B 2 extranOTe: This kit has extra screws to prevent the technicianfrom spending extra time locating a replacement in casethey lose one during installation.fOr YOur SAfeTY:WArnIng — Before beginning the installation,switch power off at service panel and lock the servicedisconnecting means to prevent power from being switchedon accidentally. When the service disconnecting meanscannot be locked, securely fasten a prominent warningdevice, such as a tag, to the service panel.JX827 and JX8301” 2.5 cm; 1’ = 0.3 m

/ 4

Related manuals for GE JX827