GE JX9152 Installation Instructions Manual

Also see for JX9152: Installation instructions

Contents

2 INSTALL THE RAILSDisconnect the microwave oven from the receptacle.Remove everything out of the microwave oven, includingpacking, Owner’s Manuals, turntable and turntablesupport. A protective film has been applied to somemicrowave oven and trim kits. If applied, remove the film.Turn over the microwave oven and secure the rails tooven Base Plate by inserting 4 short screws. Be carefulnot to scratch the microwave oven.1 LOCATE AND INSTALL THE BASEPANSet Base Pan into the front cabinet microwave oven cutout and center itright and left. Push back until the front flange is against the cabinet frontwall.Mount the Base Pan using 3 short screws.Installation InstructionsShortScrewMicrowaveOven BottomRailShortScrewFlanges DoorBase PanMounting Holes3 INSTALL THE REAR DUCT1. Gently return microwave oven to its upright position.2. Remove screw A.3. Align the rear duct with the back of microwave oven,as shown.4. Slide 2 tabs into the slots on the right side of the backof microwave oven.5. Use 2 short screws to secure top of rear duct to theback of microwave oven, as shown.A. Rear duct tabsB. SlotsA BA. Short screws (2)B. Rear ductC. Back of microwave ovenA B CScrew A3