GE Legacy Instructions Manual

GEH-5915Legacy™ LuminaireINSTRUCTIONSG E N E R A LThis luminaire is designed for use in outdoor applica-tions and must adhere to 25°C Max ambient temperaturelimitation. Install and maintain it according to thefollowing recommendations.A . M O U N T I N GREAD THOROUGHLY BEFORE INSTALLINGWARNINGRisk of electric shock• Turn power off before servicing– see instructionsCAUTIONUnit will fall if not installed properly• Follow installation instructions1. Place fixture on appropriately sized tenon.2. Tighten fixture set screws to 18 to 22 ft-lbs. of torque.3. Remove ballast cannister.4. Wire unit (see section B of instruction sheet for wiringinstructions)5. Replace ballast cannister.6. Install Lamp (see section C of instruction sheet for lampinstructions)7. Install refractor making sure that asymmetric refractorsare properly oriented with respect to their “house side” or“street side” labeling.8. Tighten globe set screws to lightly contact globe.These instructions do not purport to cover all details or variations in equipment nor to provide for every possible contingency to be met in connection with installation, operation ormaintenance. Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser’s purposes, the matter should be referredto GE Lighting Solutions.g GELighting Solutions

/ 4

Related manuals for GE Legacy