10Glass shelves Tempered glass shelves in the outdoor/indoor refrigerator are removable foreasy cleaning or for storing larger items.To remove a shelf, open the doorcompletely to avoid potential damageto the gasket. Lift up on the back of theshelf slightly. Tilt the shelf to one sideat an angle while pulling forward.To replace a shelf, open the doorcompletely to avoid potential damageto the gasket. Tilt the shelf to one sideat an angle and slide toward the back wall,placing one side onto the shelf support.Place the other side onto the oppositeshelf support. Ensure rear locking tabsare engaged. When installed properly,the shelf will not slide forward whengently pulled.To remove, lift up on the backof the shelfTilt the shelf at an angle whileremoving or replacingPlace in slots when replacingthe shelfQuickSpace ™ShelfThis shelf splits in half and slides underitself for storage of tall items on the shelfbelow.Step 1: Lift the back edge of the front halfof the shelf.Step 2: Pull slightly forward.Step 3: Lower the back edge of the fronthalf of the shelf while sliding it underneaththe back half.The entire Quick Space shelf can beremoved and replaced (see Glass Shelvessection).Step 3Step 1Step 2Controls and FeaturesOutdoor/Indoor RefrigeratorAppearance may vary