GE Monogram ZDP486ND Technical Service Manual

Also see for Monogram ZGU364ND: Owner's manual Installation instructions Installation instructions Installation instructions Installation instructions

Contents

GE Monogram ZDP486ND Technical Service Manual Manual pdf 35 page image

– 35 –Griddle AssemblyNote: The following describes the procedure toremove the griddle assembly.To remove the griddle assembly:Remove griddle flue cover and grease trough.1.Remove the (inner) clamping screws.2.Note: It’s recommended to remove the griddlecompletely when servicing the burner assembly.The griddle control has a capillary that is positionedsecurely to the underside of the griddle by a retainerthat is attached with 2 Phillips-head screws.3. Push the griddle toward the back of the range torelease tabs from slots on the front of the range.TabFront of RangeSlotCaution: The griddle is heavy. Use care when liftingand rotating the griddle to prevent damage to thecapillary.4. Lift and rotate the griddle and remove the 2Phillips-head screws and the retainer from thebottom of the griddle.Note: When installing the retainer, ensure thecapillary is in direct contact with the bottom of thegriddle.5. Remove the two 1/4-in. hex-head screws fromthe back of the grill burner.RetainerCapillary(Continued next page)