GE Monogram ZGP304NRSS Dimensions And Installation Information

Also see for ZGP304LRSS: Owner's manual Owner's manual

For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atgeappliances.com or call GE Answer Center®service, 800.626.2000.130560Specification Revised 4/11Listed byUnderwritersLaboratoriesZGP304NRSS (Natural Gas)ZGP304LRSS (Liquid Propane)GE Monogram® 30" All-Gas Professional Range with 4 BurnersDimensions and Installation Information (in inches)All Professional Ranges are factory set for natural or liquidpropane gas. The correct model should be ordered for theinstallation situation.Note: Conversion kits are included with the range if the wronggas type was ordered. High Altitude kit, WB28K10553 foroperation above 6,000 feet, is also available. The kits must beinstalled by a qualified service technician at additional cost.Installation InformationBefore installing, consult installation instructions packed withproduct or online at Monogram.com for current dimensionaldata.A suitable 30" or wider vent hood is recommended forinstallation over this range.Advance PlanningRefer to dimensional drawingsfor appropriate placement andnecessary clearances whenplanning the installation.• Working areas adjacent to therange should have 18" minimumclearance between countertopand cabinet bottom.• Clearance between range andside wall or combustible materialmust be at least 12" on each side.• Installation must conform withlocal codes. In the absence of localcodes, the range must complywith the National Fuel Gas Code,ANSI Z223.1-990.

/ 3

Related manuals for GE ZGP304LRSS