Care and CleaningInduction CooktopBe sure electrical power is off and oil surfaces ore cool before cleaning any part of the cooktop.How to removeprotectiveshipping filmand packagingtapeCarefully grasp a corner of the protective shippingfilm with your fingers and slowly peel it from theappliance surface. Do not use any sharp items toremove the film. Removeall of the film before usingthe appliance for the first time. To assure no damageis done to the finish of the product, the safest way toremove the adhesive from packaging tape on newappliances is an application of a household liquiddishwashing detergent. Apply with a soft cloth andallow to soak.NOTE:The adhesive must be removed from allparts. It cannot be removed if it is baked on.Control lockpadAs a convenience, you can lock the entirecooktop at any time when it is not in use orbefore cleaning.Locking the cooktop will prevent surfaceelements from being turned on accidentally.Begin by locking the cooktop; seeControl Lock.NormaldailycleaningUse CERAMABRYTE®Ceramic Cooktop Cleaner onthe glass cooktop.To maintain and protect the surface of your glasscooktop, follow these steps:1 Before using the cooktop for the first time, clean itwith CERAMABRYTE® Ceramic Cooktop CleanerThis helps protect the top and makes cleanupeasier2 Daily use of CERAMABRYTE®Ceramic CooktopCleanerwill help keep the cooktop looking new.3 Shakethe cleaning cream well. Apply a few dropsof CERAMABRYTE®Ceramic Cooktop Cleanerdirectly to the cooktop.4 Use a paper towel or CERAMABRYTE¢ CleaningPad for Ceramic Cooktops to clean the entirecooktop surface.5 Use a dry cloth or paper towel to remove allcleaning residue. No need to rinse.NOTE: It is very important that you DO NOT heatthe cooktop until it has been cleaned thoroughl_l.Clean gour cooktop after each spill.Use CERAMABRYTE®CeramicCooktop Cleaner.19