GE Monogram ZIFI240PLII Dimension Manual

Contents

stainless steel

ZIFI240PII – GE Monogram Fresh-Food Refrigerator Module(Custom panel required)ZIFS240PSS – GE Monogram Fresh-Food Refrigerator Module(Stainless steel)For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atGEAppliances.com or call GE Answer Center®service, 800.626.2000.Listed byUnderwritersLaboratoriesDimensions and Specifications (in inches)Installation SpaceThe cutout depth must be 24"The cutout dimensions shown allow for a full door swing and accessto the pull-out racks when installed as a built-in.• The Fresh-Food Refrigerator can be free-standing.• The stainless steel model ZIFS240PSS can be installed flush withstandard cabinetry. ZIFI240PII with custom panel will projectforward 1-3/4" of adjacent 24" deep base cabinets.• Note: Door swing is not reversible.Additional Specifications:• A 120 volt 60Hz., 15 or 20 amp power supply is required. Anindividual property grounded branch circuit or circuit breaker isrecommended. Install a properly grounded 3-prong electricalreceptacle recessed into the back wall as shown. Electricalmust be located on rear wall as shown. Note: GFI (ground faultinterrupter) is not recommended.34-1/2"-35"24" Min.23-3/4"34-1/2"23-3/4" Stainless SteelModels24-7/8" Framed Models1-1/2"Locate Outlet9"Max.10-1/2"Depth IncludingHandle:26" Stainless SteelModels Only23-3/4" Min.Note: If installing between framelesscabinets, a 1/2" wide filler strip or side panelmay be required. The filler strip will act as aspacer between the door case and adjacent cabinetand will prevent interference with cabinet door swing.The width of the opening must include filler panels.Product Clearances16" Minimum110˚Wall24"Cabinet14" Minimum110˚Wall24"CabinetAll models are factory set for a 110° door swing.For a minimum 90° door swing:• Allow 4" min. clearance to wall on the hinge side for StainlessSteel models.• Allow 4-1/2" min. clearance to wall on the hinge side for modelswith a custom panel and custom handle.For a full 110° door swing:• Allow 14" min. clearance to wall on the hinge side for StainlessSteel models.• Allow 16" min. clearance to wall on the hinge side for models witha custom panel and custom handle.Stainless SteelModelsModels with a CustomDoor PanelSpecification Revised 7/05120032R

/ 3

Related manuals for GE GE Monogram ZIFI240PLII