GE Monogram ZV1050 Installation Instructions Manual

Also see for Monogram ZV1050: Use and care guide Installation instructions Owner's manual Owner's manual Owner's manual

Contents

3Design InformationPRODUCT DIMENSIONSThis vent hood is designed to be used in vented ceilingmounted installations.PRODUCT CLEARANCESThe vent hood must be installed 25-1/2” min. and 30”max. above the cooking surface. 30” is recommendedfor 8 ft. ceilings. 30" clearance will insure that the ductcover meets the ceiling. The cooking surface should beat least 36” above the floor. Installation will be easier ifthe vent hood is installed before the cooktop andcountertop is installed.CONTENTSDesign InformationProduct Dimensions ......................................................... 3Duct Cover Accessories .................................................... 3Product Clearances .......................................................... 3Advance PlanningTools and Materials Required .......................................... 4Power Supply .................................................................... 4Duct Fittings ...................................................................... 5Installation InstructionsStep 1, Plan the location,Ceiling Support Structure ...................................... 6Ductwork ................................................................. 7Step 2, Remove Packaging ............................................... 8Step 3, Check Installation Hardware ............................... 8Step 4, Mount Template ................................................... 9Step 5, Install Support Frame .......................................... 9Step 6, Secure Wiring ..................................................... 10Step 7, Size and Install Ductwork .................................. 10Step 8, Install Decorative Duct Covers .......................... 11Step 9, Install Hood ........................................................ 11Step 10, Connect Electrical ............................................ 12Step 11, Slide Duct Cover Down .................................... 12Step 12, Install filters, Finalize Installation ................... 1310"*Heightto Ceiling42"31-1/2"*30"Recommended36" Min.* 20" to an 8 ft. ceiling.Using supplied duct cover32" for 9 ft. Ceiling.Using ZX1059SFSS Accessory44" for 10 ft. CeilingUsing ZX10510SFSS AccessoryThis vent hood is supplied with a decorative duct cover toreach 8 ft. ceiling height, or between 7’11" and 8’1".*9 ft. to 10 ft. ceilings may be 25-1/2" to 30" clearance.*The distance between the cooking surface and the bottom of thehood must be at least 25-1/2". The 30" recommended installationheight, above the standard 36” countertop, will insure duct cover fitto the ceiling. For 9 ft and 10 ft. ceilings, the hood may be lowered to25-1/2" over the cooking surface.IMPORTANT: Clearances may vary due to type of cooking productand local codes. Check with local inspectors to be sure standard isapplicable.– When installing the Island Hood above a Monogram ProfessionalRange or Cooktop, installation clearance must be at least 30".DUCT COVER ACCESSORIESOrder Accessory duct covers for 9 ft. and 10 ft. ceilings.ZX1059SFSS – For 9 ft. ceiling heightThis kit includes a decorative duct cover and supportframe to reach a 9 ft ceiling height.ZX10510SFSS – For 10 ft. ceiling heightThis kit includes a decorative duct cover and supportframe to reach a 10 ft ceiling height.Order the accessory at the same time as the vent hoodand have on site before installation begins.