8Light bulbs 7KHEXOEVDUHORFDWHGRQWKHXQGHUVLGHRIthe hood.7RFKDQJHWKHOLJKWEXOEV1. Remove the trim ring by turning itcounterclockwise.2. Grasp the bulb on the edges and removeby turning it counterclockwise.3. Replace with the same type and size bulb.These 120 volt, 50 watt, par 16 halogen floodbulbs, with standard base, are available atspecialty lighting stores.7KHVHEXOEVFDQDOVREHRUGHUHGIURP\RXU*(VXSSOLHUOrder bulb no. :%;.Care and CleaningProfessional Range HoodWarminglamps7KHZDUPLQJODPSVDUHORFDWHGRQWKHunderside of the hood.These 120 volt, 175 watt, par 38 infrared heatlamp bulbs, with standard base, are availableat some specialty lighting stores.7KHVHLQIUDUHGEXOEVFDQDOVREHRUGHUHGIURP\RXU*(VXSSOLHUOrder bulb no. :%;.127( If warming lamps are not desired,additional cooktop lighting can be obtainedby replacing the infrared bulbs with standardincandescent bulbs with up to 100 wattmaximum ratings, with standard bases. Thesebulbs are available at specialty lighting stores.'RQRWXVHDVWHHOZRROSDGLWZLOOVFUDWFKthe surface.To clean the stainless steel surface, use warm sudsywater or a stainless steel cleaner or polish. Alwayswipe the surface in the direction of the grain. Followthe cleaner instructions for cleaningthe stainless steel surface.To inquire about purchasing stainless steelappliance cleaner or polish, or to find the locationof a dealer nearest you, please call our toll-freenumber:National Parts Center 1.800.626.2002*($SSOLDQFH3DUWVFRPStainlesssteelsurfaces(on somemodels)