NetworX Series™NX-591E Cellemetry ModuleInstallation and Startup

I. GENERAL DESCRIPTION

III. ENCLOSURE INFORMATION

V. ENROLLING THE MODULE

VIII. UNDERSTANDING THE LIGHTS

IX. CONNECTION DIAGRAM

X. PROGRAMMING THE MODULE

Exiting the Program Mode

C. PROGRAMMING DATA

XI. PROGRAMMING INSTRUCTIONS

Loc 2 –7 When Phone Fault Is Detected

Loc 8 –13 When Phone Line Is Good

XII. PROGRAMMING WORKSHEETS

XIII. SPECIFICATIONS

GE NX-591E Installation And Startup Manual

general description

feature definitions

programming the led keypads

programming the control

loading factory defaults

communicator format selections

standard (default) zone types

auxiliary output event selection

nx-6 programming worksheets

communicator codes for slow speed formats only

appendix 1 reporting fixed codes in contact id and sia

appendix 2 reporting zone codes in sia or contact id

appendix 3 expander numbers for reporting expander trouble

terminal description

board installation

regulatory notices

underwriters laboratories information

specifications

NetworX Series

GENERAL INFORMATION

FEATURE DEFINITIONS

P ROGRAMMING THE NX-7002 VIA THE LED KEYPAD

EXITING THE PROGRAM MODE

FEATURE SELECTION DATA

I NSERTING THE SIM CARD

PROGRAMMING HE NX-7002 GPRS MODULE

T ESTING THE RSSI VALUE

PROGRAMMING THE LOCATIONS

NX-7002 FOR PRIMARY REPORTING

INSTALLATION GUIDELINES

TECHNICAL SPECIFICATIONS

operator name

security system notes

GLOSSARY OF TERMS

UNDERSTANDING THE LIGHTS

INSTANT LIGHT

EMERGENCY ACTIVATION KEYS

ARMING YOUR SYSTEM IN THE "STAY" MODE

CHANGING MODES WHILE SYSTEM IS ARMED

BYPASSING ZONES

ADDING AND CHANGING USER CODES

OTHER KEYPAD FUNCTIONS

RESET FUNCTION

SETTING THE KEYPAD LIGHTING

KEYPAD CONTROL TONES (BEEPS)

EMERGENCY EVACUATION PLANS

NX-591E


Contents Table Of Contents I. GENERAL DESCRIPTION III. ENCLOSURE INFORMATION V. ENROLLING THE MODULE VIII. UNDERSTANDING THE LIGHTS IX. CONNECTION DIAGRAM X. PROGRAMMING THE MODULE Exiting the Program Mode C. PROGRAMMING DATA XI. PROGRAMMING INSTRUCTIONS Loc 2 –7 When Phone Fault Is Detected Loc 8 –13 When Phone Line Is Good XII. PROGRAMMING WORKSHEETS XIII. SPECIFICATIONS	NetworX Series™NX-591E Cellemetry ModuleInstallation and Startup Next / 24