GE NetworX NX-1500E User Manual

Also see for NetworX Series: Installation and startup Installation and start-up manual Installation manual Installation and startup guide Installation and startup

Contents

Page 16RESET FUNCTIONThis function is used to reset Smoke Detectors, Zone Troubles, and ZoneTampers. Your system must be Disarmed to use the Reset function.Step 1 Press [r]-[7]. Resets have now been performed.Step 2 If the keypad begins beeping, the reset did not execute properly.Enter your code to silence the keypad. Wait a few minutes andrepeat step 2 to attempt another reset. If the keypad still beepsafter repeated attempts, please contact your installer.SET SYSTEM DATEStep 1 Press the [r]-[9]-[6]-[“Master Code”].Step 2 Enter the “Day of Week “1=Sunday 3=Tuesday 5=Thursday 7=Saturday2=Monday 4=Wednesday 6=FridayStep 3 Enter the “Month Code”. Must always be two (2) digits.01 = January 05 = May 09 = September02 = February 06 = June 10 = October03 = March 07 = July 11 = November04 = April 08 = August 12 = DecemberStep 4 Enter the “Day Code”. Must always be two (2) digits.Example: The 5th would be entered as [0]–[5].Step 5 Enter the last two digits of the “Year Code”.Example: For 1997 enter [9]–[7].SETTING THE SYSTEM CLOCKStep 1 Press [r]-[9]-[7]-[“Master Code”].Step 2 Enter the “hour code” which must be two (2) digits. Note: Theclock is a 24-hour clock. Refer to the following table.Step 3 Enter the “minutes code” which must be two (2) digits.Example: 7 minutes after would be entered [0]–[7].