GE PACSystems RX3i Application Manual

Also see for PACSystems* RX3i: Reference manual User manual CPU Programmer's Reference Manual Quick start guide Quick start guide

GFK-2928 December 2017 23Chapter 5 PLC Hardware Configuration (Primary PLC)5.1 LC Reference Memory SettingsIn the Hardware Configuration (Primary) double-click on the RX3i CPU module to display the configurationsettings. Click on the Memory tab and adjust the upper memory limits. The minimum settings are shownbelow:%AI Analog Input 16384%AQ Analog Output 8192%R Register Memory 32640%W Bulk Memory 65536Symbolic Discrete 65536Symbolic Non-Discrete 65536I/O Discrete 65536I/O Non-Discrete 655365.2 Transfer List EntriesInput Transfer Points%I configured for length=0%Q (as needed)%M (as needed)%G (as needed)%AI configured for length=0%AQ (as needed)%R (as needed)%W (as needed)Output Transfer Points%I configured for length=0%Q typically configured to the highest reference used for physical outputs, as a minimum%M (as needed)%G (as needed)%AI configured for length=0%AQ typically configured to the highest reference used for physical outputs, as a minimum%R (as needed)%W (as needed)