Dishwasher Trim PiecesPARTS SUPPLIED:■ Two #8-18 x 5/8" Phillips special head screws, tosecure dishwasher to underside of countertop orsides of cabinets. (Screws located in user bag.)■ Side and top trim pieces■ Trim Panel Accessory Kit (not shown).Model PDW9700 only■ Drain Hose, Drain Hose Hanger and Hose ClampInstallation PreparationTOOLS YOU WILL NEED:■ Phillips head screwdriver■ 1/4" and 5/16" nutdriver■ 6" Adjustable wrench■ Level■ Carpenters square■ Measuring tape■ Safety glasses■ Flashlight■ Bucket to catch water when flushing the line■ 15/16" socket (optional for skid removal)■ GlovesFor New Installations Only:■ Tubing cutter■ Drill and appropriate bits■ Hole saw setMATERIALS YOU WILL NEED:■ Ferrule, compression nut and 90° Elbow (3/8" NPTexternal thread on one end, opposite end sized tofit water supply)■ Thread seal tape■ UL Listed wire nuts (3)Materials For New Installations Only:■ Air gap for drain hose, if required■ Waste tee for house plumbing, if applicable■ Electrical cable or power cord, if applicable■ Screw type hose clamps■ Strain relief for electrical connection■ Hand shut-off valve■ Water line 3/8" min. copper■ Coupler for extending drain line, if applicableHose Clamps90 ° ElbowAir GapCarpenters SquareCouplerDrill & BitsElectrical CableFlashlightHand ValveHole Saw BitLevel 2Measuring TapeNutdriverHose ClampsRatchet & SocketSafety GlassesScrew Driver IITapeTubing CutterWire Nuts#8 PhillipsSpecial Head Screws5/8” longHose ClampDrain HoseTrim PiecesHandShut-OffValve90° Elbow,Ferrule andCompression NutThreadSeal TapeWire Nuts (3)Hot Water LineElectrical Cable(or Power Cord, if applicable)Waste TeeCouplerAirGapScrew TypeHose ClampsStrain ReliefPhillipsHeadScrewdriver1/4" and5/16" NutdriverLevelCarpentersSquare1/4" and5/16" Socket6" AdjustableWrenchTubing CutterMeasuring TapeSafety GlassesFlashlightGloves Bucket Hole Saw Set Drill and Bits#8 Phillips SpecialHead ScrewsDrain HoseWaste TeeStrain ReliefHot Water LineGLOVES Bucket2Drain Hose HangerCrescent Wrench�����������