GE PEB7226SFSS Owner's Manual

Also see for PEB7226: Owner's manual

Care and cleaning of the microwave oven.Helpful HintsAn occasional thorough wiping with a solution of baking soda and water keeps theinside fresh.Unplug the cord before cleaning any part of this oven.How to Clean the InsideWalls, Floor, Inside Window, Metal and Plastic Parts on the DoorSome spatters can be removed with a paper towel; others may require a damp cloth. Removegreasy spatters with a sudsy cloth, then rinse with a damp cloth. Do not useabrasive cleaners or sharp utensils on oven walls.To clean the surface of the door and the surface of the oven that come together uponclosing, use only mild, nonabrasive soaps or detergents using a sponge or soft cloth. Rinsewith a damp cloth and dry.Never use a commercial oven cleaner on any part of your microwave.Removable Turntable and Turntable Support7RSUHYHQWEUHDNDJHGRQRWSODFHWKHWXUQWDEOHLQWRZDWHUMXVWDIWHUFRRNLQJ:DVKLWFDUHIXOO\in warm, sudsy water or in the dishwasher. The turntable and support can be broken if dropped.Remember, do not operate the oven without the turntable andsupport in place.How to Clean the OutsideDo not use cleaners containing ammonia or alcohol on the microwave oven. Ammonia oralcohol can damage the appearance of the microwave.CaseClean the outside of the microwave with a sudsy cloth. Rinse with a damp cloth and then dry. Wipethe window clean with a damp cloth.Control Panel and DoorWipe with a damp cloth. Dry thoroughly. Do not use cleaning sprays, large amounts of soap andZDWHUDEUDVLYHVRUVKDUSREMHFWVRQWKHSDQHO³WKH\FDQGDPDJHLW6RPHSDSHUWRZHOVFDQDOVRscratch the control panel.Door SurfaceIt is important to keep the area clean where the door seals against the microwave. Use only mild,non-abrasive detergents applied with a clean sponge or soft cloth. Rinse well.Power CordIf the cord becomes soiled, unplug and wash with a damp cloth. For stubborn spots, sudsy watermay be used, but be certain to rinse with a damp cloth and dry thoroughly before plugging cordinto outlet.Stainless Steel (on some models)Do not use a steel-wood pad; it will scratch the surface.To clean the stainless steel surface, use a hot, damp cloth with a mild detergent suitablefor stainless steel surfaces. Use a clean, hot, damp cloth to remove soap. Dry with a dry, clean cloth.Always scrub lightly in the direction of the grain.24