GE PVB98DTBB Dimensions And Installation Information

For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atgeappliances.com or call GE Answer Center®service, 800.626.2000.220983Specification Revised 12/11Listed byUnderwritersLaboratoriesPVB98DTGE Profile™ 36" Telescopic Downdraft SystemVenting Options (in inches)Through the Floor In Cabinet Discharge (Down)In Cabinet Discharge (Right) In Cabinet Discharge (Left)Note: Telescopic downdraft vents are notrecommended to be installed with cooktops that areflush mounted.Approved for use with the following GE Profile™, andGE cooktops–36" electric models, 36" gas sealedburner models and 36" induction models.Not Approved for use with standard burner gascooktops.Note: The cooktop must be at least 26" deep with aflat surface area of 23-1/2" or more, front to back. Inaddition, other clearances to the front edge of thecountertop must be considered.Note: Dimensions shown are for reference only. Beforecutting out countertop, refer to instructions packed withdowndraft and cooktop.Note: Installation on cabinets/countertops againstthe wall will not be possible in most applications.Against the wall installations are limited todimension requirements. Refer to installationinstructions packed with product for further details.JXRB67 Indoor Remote Accessory. Optionalaccessory may be ordered for installation of motorand blower assembly in an indoor remote location.Dimensions and Installation Information (in inches)*

/ 3

Related manuals for GE Profile PVB98DT