GE Profile 162D9617P008 Owner's Manual

Also see for Appliances 30: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

Customer ServiceTroubleshooting TipsOperating InstructionsSafety InstructionsInstallation Instructions21Trim kits and decorator panels.For CustomStyle modelsRead these instructions completely and carefully.Before You BeginSome models are equipped with trim kits that allow you to install door panels. You can order pre-cutblack or white decorator panels from GE Parts and Accessories, 800-626-2002, or you can add woodpanels to match your kitchen cabinets.Panels less than 1/4″(6 mm) thickWhen installing wood panels less than 1/4″ (6 mm) thick, you need to create a filler panel, such as 1/8″cardboard, that will fit between the face of the door and the wood panel. If you are installing the pre-cutdecorator panels, pre-cut filler panels are included in the kit. The combined thickness of the decorator orwood panel and the filler panel should be 1/4″ (6 mm).3/4″(19 mm) or Raised PanelA raised panel design screwed or glued to a 1/4″ (6 mm) thick backing, or a 3/4″ (19 mm) routed boardcan be used. The raised portion of the panel must be fabricated to permit clearances of at least 2″ (51 mm)from the handle side for fingertip clearance.Weight limitations for custom panels:Fresh Food 35 lb. (16 kg) max.Freezer Door 25 lb. (11 kg) max.2″ (51 mm)ClearanceHandle SideAppearancePanel RefrigeratorDoor1/4″ (6 mm)Thick Backing3/4″(19 mm)