GE Profile 200D2600P039 Owners And Installation Manual

Also see for 25: Owners and installation manual Owner's manual Owner's manual Use and care & installation guide Use and care & installation guide

Contents

7Empty the pan. Place the Chill/Thawtray in the pan. Place the items on thetray and close the pan completely.Select the ExpressThaw,™ ExpressChill ™or SelectTemp ™ pad. The display andSET light will come on. Tap the paduntil the light appears next to thedesired setting. Use the chart todetermine the best setting to use. To stop a feature before it isfinished, tap that feature’s paduntil no options are selected andthe display is off. During ExpressThaw andExpressChill, the display on thecontrols will count down the timein the cycle. After the ExpressThaw cycle iscomplete, the pan will reset to theMEAT setting (32°F) to help preservethawed items until they are used. The displayed actual temperature ofthe CustomCool pan may vary slightlyfrom the SET temperature based onusage and operating environment.NOTE: For food safety reasons, it is recommendedthat foods be wrapped in plastic wrap when usingExpressThaw. This will help contain meat juicesand improve thawing performance.About CustomCool ™. GEAppliances.comThe CustomCool ™ feature is a system ofdampers, a fan, a temperature thermistorand a heater. Depending on the functionselected, a combination of these will beused to quickly chill items, thaw items orhold the pan at a specific temperature.The pan is tightly sealed to prevent the pan’stemperature from causing temperaturefluctuations in the rest of the refrigerator.Some CustomCool models feature a beveragecenter. It is designed to store beverages atcolder temperatures. Select the BeverageCenter pad if you like to keep extra-chilledrefreshments on hand.The controls for this pan are located at thetop of the refrigerator with the temperaturecontrols.How to UseHow it WorksExpressThaw ™To remove:Pull the drawer out to the stop position.Rotate all four swing locks to the unlockposition.Lift the front of the drawer up and out.To replace:Make sure all four swing locks are in theunlock position.Place the sides of the drawer into thedrawer supports, making sure the swinglocks fit on the drawer slots.Lock all four swing locks by rotatingthem to the lock position.How to Remove and Replace the DrawerExpressChill ™Consumer SupportTroubleshooting TipsOperating InstructionsSafety Instructions Installation Instructions