GE Profile 200D8074P009 Owner's Manual

Contents

19Trim kits and decorator panels.Read these instructions completely and carefully.Before You BeginSome models are equipped with trim kits that allow you to install door panels. You can orderpre-cut black, white, bisque or stainless steel decorator panels from GE Parts and Accessories,800.626.2002, or you can add wood panels to match your kitchen cabinets.Panels less than 1/4″ (6 mm) thickWhen installing wood panels less than 1/4″ (6 mm) thick, you need to create a filler panel, such as 1/8″cardboard, that will fit between the face of the door and the wood panel. If you are installing the pre-cutdecorator panels, pre-cut filler panels are included in the kit. The combined thickness of the decoratoror wood panel and the filler panel should be 1/4″ (6 mm).For CustomStyle™ models3/4″ (19 mm) or Raised PanelA raised panel design screwed or glued to a 1/4″ (6 mm) thick backing, or a 3/4″ (19 mm) routed boardcan be used. The raised portion of the panel must be fabricated to permit clearances of at least 2″ (5.1 cm)from the handle side for fingertip clearance.Panels thicker than 1/4″ (6 mm), up to 3/4″ (19 mm) max, will require that the outer 5/16″ (8 mm) ofpanel perimeter be no thicker than 1/4″ (6 mm).Weight limitations for custom panels:Fresh Food 38 lbs. (17 kg) max.Freezer Door 28 lbs. (13 kg) max.2″ (5.1 cm)ClearanceHandle SideAppearancePanel RefrigeratorDoor1/4″ (6 mm)Thick Backing3/4″(19 mm)Panels 1/4″ thick or lessPanels thicker than 1/4″ (6 mm)1/4″ max1/4″ (6 mm) max3/4″ (19 mm)5/16″ (8 mm)Consumer SupportTroubleshooting TipsOperating InstructionsSafety Instructions Installation Instructions