GE Profile Advantium SCA2001KSS Installation Instructions Manual

Also see for Profile Advantium SCA2001KSS: Installation instructions Owner's manual Owner's manual Dimensions

21Installation InstructionsMOUNT THE OVENFOR EASIER INSTALLATION AND PERSONAL SAFETY,WE RECOMMEND THAT TWO PEOPLE INSTALLTHIS OVEN.IMPORTANT: Do not grip or use handle duringinstallation.NOTE: If your cabinet is metal, use the nylon grommetaround the power cord hole to prevent cutting of the cord.NOTE: We recommend using filler blocks if the cabinetfront hangs below the cabinet bottom shelf.IMPORTANT: If filler blocks are not used, case damagemay occur from over tightening screws.C4Secure blower unit to oven with the screw removedin Step 2.Replace blower plate with the screws removedin Step 1.76Blower MotorScrewNOTE: When mounting the oven,thread power cord through holein bottom of top cabinet. Keep ittight throughout Steps 1–3.Do not pinch cord or lift ovenby pulling cord.Rotate front of oven upagainst cabinet bottom.Insert a self-aligning screw through top center cabinethole. Temporarily secure the oven by turning thescrew at least two full turns after the threads haveengaged. (It will be completely tightened later.)Be sure to keep power cord tight. Be careful not topinch the cord, especially when mounting flush tobottom of cabinet.If your cabinet front hangs more than 23⁄4″ below thecabinet bottom, you may need to use longer screws thanthe ones provided with this product. The screws providedwith this product (hardware item 3) are self-aligning,large-head machine screws 1/4″ diameter, 31⁄4″ long,with SAE 28 threads per inch. It is important that youuse replacement screws just long enough to attach theproduct to the cabinet. The length can be determinedby measuring the height of the overhang from the topof the cabinet floor to the bottom of the overhang andadding 1″ to that length. This will be the length of the1/4″ SAE 28 threads per inch screws you need.You will also need to use washers 3/4″ diameter to fit thescrews you purchase. This will prevent the screw headsfrom pulling through the bottom of the cabinet whentightening during installation.32Lift oven, tilt itforward, andhook slots at backbottom edge onto2 lower tabs ofmounting plate.1RetainingFlangeBlower PlateBack of OvenBlower Plate Screws

/ 24

Related manuals for GE Profile Advantium SCA2001KSS