GE Profile Advantium SCA2001KSS Installation Instructions Manual

Also see for Profile Advantium SCA2001KSS: Installation instructions Owner's manual Owner's manual Dimensions

9DETERMINING WALL PLATE LOCATION UNDER YOUR CABINETCPlate position—beneath flat bottomcabinetPlate position—beneath recessed bottomcabinet with front overhangMounting Plate TabsTouching the CabinetBottomMounting Plate withTabs Below CabinetBottom the SameDistance as the FrontOverhang DepthAt least 30″, up to 36″Plate position—beneath framed recessedcabinet bottomMounting Plate TabsTouching the BackFrameInstallation InstructionsYour cabinets may have decorative trim that interfereswith the oven installation. Remove the decorative trimto install the oven properly and to make it level.THE OVEN MUST BE LEVEL. Use a level to makesure the cabinet bottom is level.If the cabinets have a front overhang only, with no backor side frame, install the mounting plate down the samedistance as the front overhang depth. This will keep theoven level.Measure the inside depth of the front overhang.Draw a horizontal line on the back wall an equaldistance below the cabinet bottom as the insidedepth of the front overhang.For this type of installation with front overhangonly, align the mounting tabs with this horizontalline, not touching the cabinet bottom as describedin Step D.32130″ toCooktop30″ toCooktop