GE Profile GSD4010 Owner's Manual

Also see for GSD4010: Owner's manual Owner's manual

Contents

ProblemPossible Causes What To DoDetergent cup lid • Open the door and presslatched accidentally theSTART/RESET padby user three times within twoseconds. The detergentcup will trip.Water standing in This is normal • A small amount of cleanthe bottom of the tub water around the outlet onthe tub bottom at the backof the tub keeps the waterseal lubricated.Water won’t pump Drain is clogged • If you have an air gap,out of the tub clean it.• Check to see if your kitchensink is draining well. If not,you may need a plumber.• If the dishwasher drains into adisposer, run disposer clear.Suds in the tub Correct detergent • Use only automatic dishwasherwasn’t used detergents to avoid sudsing.• To remove suds from the tub,open the dishwasher and letsuds evaporate. Add 1 gallonof cold water to the tub. Closethe door until it locks intoplace. Pump out water bypressingSTART/RESET, thenimmediately pressSTART/RESETagain. Repeat if necessary.Rinse agent • Always wipe up rinse agentwas spilled spills immediately.Stained tub interior Detergent with • Some detergents containcolorant was used colorant (pigment or dyes)that will discolor the tubinterior with extended use.Check the detergent cupfor signs of any discoloration.If cup is discolored, change todetergent without any colorant.21Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information