GE Profile GSD4010 Owner's Manual

Also see for GSD4010: Owner's manual Owner's manual

Contents

Before you call for service…24ProblemPossible Causes What To DoDishes don’t dry Low inlet water • Make sure inlet watertemperature temperature is correct.• SelectHI TEMP RINSEand/orHEATED DRY.Rinse agent dispenser • Check the rinse agentis empty dispenser.Control panel Door latch may not be • Call for service.responded to inputs properly seatedbut dishwasher neverfilled with waterDishwasher won’t run Fuse is blown, or the • Replace fuse or resetcircuit breaker tripped circuit breaker. Removeany other appliances fromthe circuit.• Try resetting theSTART/RESET pad.Steam This is normal • Steam comes throughthe vent by the door latchduring drying and whenwater is being pumped out.Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service