GE Profile GSH6LGZ Owner's Manual And Installation Manual

Contents

6Consumer Support Troubleshooting Tips Operating Instructions Safety InstructionsInstallationInstructionsAbout ClimateKeeper2.™How it WorksThe new ClimateKeeper2 ™ is the industry’smost advanced refrigeration system,delivering optimum temperature andhumidity performance to keep foodgarden fresh longer and reduce freezerburn, while maintaining E star-level efficiency.The new ClimateKeeper2 system featurestwo evaporators—one for the refrigeratorand one for the freezer.This provides two separate cooling systemsfor the entire unit, and separates the airflowbetween the fresh food and freezer sectionsduring normal cooling operations.This ensures that the humidity levels in thefresh food section are significantly higherthan in a conventional system,* allowingfresh produce and other unsealed foods toretain their moisture content and freshnesslonger. Moisture sensitive foods such as freshfruit, salads, rice, etc., can now be stored onopen shelves without excessive moisture loss.Due to the higher humidity in the refrigerator,you may on occasion experience fog or smallamounts of moisture in the refrigeratorcompartment. This is normal and maycome and go as different food loadsand environmental conditions change.Wipe dry with a paper towel if desired.The separate airflow system minimizesthe mixing of air between the twocompartments, which reduces odortransfer to improve the taste of ice.The ClimateKeeper2 system also reducesthe number of defrosting cycles in the freezerevaporator, thereby reducing freezer burn.*Testing shows a higher level of humidity inthe Fresh Food section in ClimateKeeper2refrigerators versus conventional units.About CustomCool ™. (on some models)Empty the pan. Place the Chill/Thaw trayin the pan. Place the items on the trayand close the pan completely.LCD Models:Access by: Home > Options >Refrigerator Options > CustomCool PanNon-LCD Models:Select the ExpressThaw™, ExpressChill™or SelectTemp™ pad. The display and SETlight will come on. Tap the pad until thelight appears next to the desired setting.Use the following chart to determine thebest setting to use. ExpressChill can be set to 15, 30 or 45minutes. The default is 15 minutes. To stop a feature before it is finished:For LCD Models:Go into that feature’s menu and pressthe OFF button.For Non-LCD Models:Tap that feature’s pad until no optionsare selected and the display is off. During ExpressThaw andExpressChill,the display on thecontrols will count down the timein the cycle (on some models). After the ExpressThaw cycle iscomplete, the pan will reset to theMEAT setting (32°F [0°C]) to helppreserve thawed items until theyare used. The displayed actual temperatureof the CustomCool pan may varyslightly from the SET temperaturebased on usage and operatingenvironment.NOTE: For food safety reasons, it isrecommended that foods be wrapped inplastic wrap when using ExpressThaw.This will help contain meat juices and improvethawing performance.How to UseExpressThaw ™To remove:Pull the drawer out to the stop position.Rotate all four swing locks to the unlockposition.Lift the front of the drawer up and out.To replace:Make sure all four swing locks are inthe unlock position.Place the sides of the drawer intothe drawer supports, making surethe swing locks fit on the drawer slots.Lock all four swing locks by rotating themto the lock position.How to Remove and Replace the DrawerExpressChill ™