GE Profile PGS908 Installation Instructions Manual

Also see for Profile PGS908: Installation instructions Brochure Technical service guide Use and care manual Owner's manual

TOOLS YOU WILL NEEDMATERIALS YOU MAY NEED131-10642-1 03-07 JRInstallation Gas Slide-In RangeInstructions PGS908, PGS975BEFORE YOU BEGINRead these instructions completelyand carefully.• IMPORTANT — Save theseinstructions for local inspector’s use.• IMPORTANT — Observe allgoverning codes and ordinances.• Note to Installer – Be sure to leave theseinstructions with the Consumer.• Note to Consumer – Keep theseinstructions for future reference.• Product failure due to improper installationis not covered under the Warranty.WARNING — This appliance mustbe properly grounded.• IMPORTANT — Leak testing of theappliance shall be conducted according tothe manufacturer’s instructions.• Proper installation is the responsibilityof the installer and product failure due toimproper installation is NOT covered underwarranty.IN THE COMMONWEALTH OFMASSACHUSETTS:• This product must be installed by alicensed plumber or gas fitter.• When using ball-type gas shut-off valves,they shall be the T-handle type.• A flexible gas connector, when used, mustnot exceed 3 feet.PARTS INCLUDEDAnti-Tip BracketShut Off ValvePipe FittingsCSA-Approved Flexible Gas Line3/8″ Min. ID, 1/2″ NPT Connection,3-foot Maximum Length (Massachusetts Only)Joint SealantWrench or Pliers(for 1-7/16” Nut)Level1/4” Nut DriverSafety GlassesDrillTape MeasureScrewsRear Filler2 ScrewsPhillips HeadScrewdriverPipe WrenchQuestions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.comIn Canada, call 1.800.361.3400 or Visit our Website at: www.geappliances.caFlat-bladeScrewdriver