GE Profile JP950WK Manual
  |
Dimensions and Installation InformationFor answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center® service,800.626.2000.Dimension and installation information are shown in inches.Specification Revised 7/05220563Listed byUnderwritersLaboratoriesElectrical junction box 16" MIN.below countertop30" MIN. tounprotectedcabinetCut shouldnot interferewith cabinetstructure atfront1-1/2" MIN.clearance toside wallfrom cut-out1-3/4" MIN.clearance toside wallfrom cut-out18" MIN.to cabinet1-3/4" torear wall13" MAX.depth3-1/4*Cooktop2-1/2Required28-1/219-5/829-3/4 21-5/16*Depth of unit at conduit location (rear) is 4-5/8"†Note: Check local codes for required breaker sizeImportant: Requires a 5” free area betweenthe bottom of the cooktop to any combustiblematerial, i.e., shelving. Free area not requiredwhen installing wall oven underneath cooktop.Refer to installation instructions. Requires an18” minimum from cooktop to adjacentoverhead cabinets. Units are furnished witha 48” flexible armored cable.Note: 30” Ribbon cooktops are approved for use over select GE 30” SingleWall Ovens and Warming Drawers. All 30" ribbon cooktops can be installedover 27" wall ovens and warming drawers. Refer to cooktop and wall oven/warming drawer installation instructions packed with product for currentdimensional data. If installed with a GE Profile™ Telescopic Downdraft System,consult both the cooktop and downdraft installation instructions packedwith product before installing. Cooktop gas/electric supply may need to bere-routed to install downdraft. The countertop must be at least 26" deep witha flat surface area of 23-1/2" or more, front to back. In addition, otherclearances to the front edge of the countertop must be considered.Consult cabinet and countertop manufacturer’s specs for flush mountinstallation prior to install. Before installing, consult installationinstructions packed with product for current dimensional data.Flush Mount Installation Kit : Accommodates both 30” and 36” installations.Not for use with stainless steel models. JXFLM2TW (True White) JXFLM2CC(True bisque) JXFLM2BB (Black - use with black glass cooktops with a white,bisque, or black pattern)KW Rating240V 7.9208V 5.6Breaker Size240V 40 Amps†208V 30 Amps†JP950WK/BKGE Profile™ 30" Built-In CleanDesign Electric CooktopR |
Related manuals for GE Profile JP950BK
GE PROFILE JP969BH User Manual
GE Profile JGP989 User Manual
GE Profile JP3530 Owner's Manual
GE Profile JGP970 Owner's Manual
GE Profile JEP5030 Owner's Manual
GE Profile PP9036 Owner's Manual
GE Profile PP9830 Owner's Manual
GE Profile PHP9036 Owner's Manual
GE Profile PVP6004 Use & Care Manual
GE JP950 Owner's Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine