GE Profile JT912SKSS Dimensions And Installation Information

RListed byUnderwritersLaboratoriesDimensions and Installation InformationFor answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center® service,800.626.2000. Dimension and installation information are shown in inches.Specification Revised 2/06220235JT912SKGE Profile™ 30" Built-In Single OvenKW Rating240V 3.6208V 2.7Breaker Size240V 20 Amps208V 20 AmpsA Allow 1" overlap of oven over top and bottom edges of cutoutB Allow 11/16"-3/4" for overlap of oven over side edges of cutoutMost 30” Wall Cabinets can be used with this unit.Note: These ovens are not approved for stackable or side-by-sideinstallations. Cabinets installed adjacent to wall ovens must have anadhesion spec of at least a 194°F temperature rating.Electric wall ovens are not approved for installation with a plugand receptacle. They must be hard wired in accordance withinstallation instructions.Installation Information: Before installing, consult installation instructionspacked with product for current dimensional data.Cutout width28-1/2'' MIN.28-5/8'' MAX.29-3/428-1/430Recommendedcutout location32-1/2"from floor21JunctionboxlocationAllow minimum of 21'' for clearanceto adjacent corners, drawers, walls, or etc.Conduit(48-1/2"long)527-1/4'' MIN.27-5/16'' MAX.Cutout heightAB23-1/2'' MIN.Cutout depth22'' MIN.CL(Must Support 275 LBS.)2 x 4 orequivalentrunnersSuitablebracingto supportrunners21-5/8"over centerlineof cabinet

/ 3

Related manuals for GE Profile JT912SK