Dimension and installation information are shown in inches.Dimensions and Installation InformationFor answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center® service,800.626.2000.RListed byUnderwritersLaboratoriesSpecification Created 1/05220353JK955SKGE Profile™ 27" Built-In Double OvenKW Rating240V 6.8208V 5.1Breaker Size240V 30 Amps208V 30 AmpsCabinet 27"A - Cabinet Width Required 27" min.B - Minimum Cabinet Depth 23-5/8"C - Opening Width 25" min. - 25-1/4" max.D - Opening Height 50-1/8" max.E - Recommended MinimumCutout Location from Floor 13-1/4"OvenF - Overall Depth 23-5/8"w/o trimG - Overall Height with trim50-1/4"51"H - Overall Width 26-5/8"Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of atleast a 194°F temperature rating. For 27” built-in single ovens, if marks, blemishesor the cutout opening is visible above the installed oven, it may be necessary toadd wood shims under the runners and front trim until the marks or openingsare covered.Electric wall ovens are not approved for installation with a plug and receptacle.They must be hard wired in accordance with installation instructions.Installation Information: Before installing, consult installation instructions packedwith product for current dimensional data.10 Locatejunctionboxfor 27"modelseither5" MIN.below cutoutfloor or 44"MIN. abovecutout floor6015 Built-In Double Ovens A,B,C(Pub. 1-G003 pg 105A) May 12, 1993Allow 3/4"for overlapover all edgesof cutoutAMinimumcutoutlocationfrom floorDE2" X 4" orequiv. runners(cutout floor)20" MIN.door openingallowanceBCHFGConduit49" long20CL(Must Support 275 LBS.)2 x 4 orequivalentrunnersSuitablebracingto supportrunners18"over centerlineof cabinet