GE Profile PB950SFSS Dimensions And Installation Information

Also see for PB950SFSS: Use and care manual

Listed byUnderwritersLaboratoriesAll GE ranges are equipped withan Anti-Tip device. The installationof this device is an important,required step in the installationof the range.Dimensions and Installation Information (in inches)For answers to your Monogram® or GE®appliance questions, visit our website atgeappliances.com or call GE Answer Center®service, 800.626.2000.PB950SFGE Profile™ Series 30” Free-Standing Double Oven Range with ConvectionSpecification Created 6/13 2210433024337-1/2Use a flush mountoutlet receptacle.Orient the receptacleso the length isparallel to the floor.Acceptable electricaloutlet area:w/o handlew/handle4528-1/425-3/44729-7/835-3/4to36-1/21130" Free-Standing Electric Double Oven RangeReceptacle LocationsLocally approved flexible service cord or conduit must be usedbecause terminals are not accessible after range installation.See shaded area in drawing for location of electrical outlet box.Recommended outlet locations allow range to be installed directlyagainst wall.Note: This appliance has been approved for 0” spacing toadjacent surfaces above the cooktop. However, a 6” minimumspacing to surfaces less than 15” above the cooktop andadjacent cabinet is recommended to reduce exposure tosteam, grease splatter and heat.Installation Information: Before installing, consult installationinstructions for current dimensional data and additionalrequirements.KW Rating240V 13.5208V 10.1Breaker Size240V 40 Amps †208V 40 Amps ††Note: Check local codes for required breaker size.

/ 2

Related manuals for GE PB950SFSS