GE Profile PS950SFSS Dimensions And Installation Information

PS950SFGE Profile™ Series 30" Slide-In Double Oven Electric Convection RangeFor answers to your Monogram® or GE®appliance questions, visit our website atgeappliances.com or call GE Answer Center®service, 800.626.2000.Specification Created 5/13 220458All GE ranges are equipped withan Anti-Tip device. The installationof this device is an important,required step in the installationof the range.Listed byUnderwritersLaboratoriesDimensions and Installation Information (in inches)Receptacle Locations: Locally approved flexible service cord orconduit must be used because terminals are not accessible after rangeinstallation. See shaded area in drawing for location of electrical outlet box.Recommended outlet locations allow range to be installed directly againstrear wall.Note: This appliance has been approved for 0" spacing to adjacentsurfaces above the cooktop. However, a 6" minimum spacing tosurfaces less than 15" above the cooktop and adjacent cabinet isrecommended to reduce exposure to steam, grease splatter and heat.Installation information: Before installing, consult installationinstructions for current dimensional data and additionalrequirements.MINIMUM DIMENSIONS BETWEEN COOKTOP, WALLS AND ABOVE THE COOKTOP:A. Make sure the wall covering, countertop, flooring and cabinets around the range cthe range.B. Allow 30" minimum clearance between surface units and bottom of unprotected wbottom of wood or metal cabinet is protected by no less than 1/4" thick flame retardasheet metal, (.015"), .015" thick stainless steel, .024" aluminum or .020” copper. Acceptso the length is parallel to floor.C. This appliance has been approved for 0" spacing to adjacent surfaces above the coless than 15" above the cooktop and adjacent cabinet is recommended to reduce expTo reduce the risk of burns or fire when reaching over hot surface elements, cabinet sIf cabinet storage space is to be provided above the cooktop, the risk can be reducedbeyond the front of the cabinets.PS950SFANOTE CBACBothSidesNOTE: Use a 4' power cord to prevent interferencewith unit when installing.ANOTE CBACBothSides*Depth including door handle is approximately 28-7/8".297⁄8”36”297⁄ 8”311⁄ 4 ”371⁄ 4”*28 7⁄ 8”257⁄8”45 ”1⁄8se a 4' power cord to prevent interferencewhen installing.*ADA qualified basedon Uniform FederalAccessibility Standards*KW Rating240V 15.2208V 11.4Breaker Size240V 40 Amps †208V 40 Amps ††Note: Check local codes for required breaker size.

/ 2

Related manuals for GE Profile PS950SF