GE Profile PHP900SMSS Dimensions And Installation Information

Also see for Profile CleanDesign PHP900SM: Manual Specifications Dimensions and installation information

For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center ® service,800.626.2000.220582†Note: Check local codes for required breaker sizeImportant: Allow 12" minimum verticalclearance between the cooktop bottom and anycombustible surfaces. Free area not requiredwhen installing wall oven underneath cooktop.Refer to installation instructions. Requires a15" minimum from cooktop to adjacentoverhead cabinets. Units are furnished witha 36" flexible armored cable.Note: 36" Ribbon cooktops are approved for use over GE 30" Single WallOvens and Warming Drawers only. Refer to cooktop and wall oven/warming drawer installation instructions packed with product for currentdimensional data. If installed with a GE Profile™ Telescopic Downdraft System,consult both the cooktop and downdraft installation instructions packed withproduct before installing. Cooktop gas/electric supply may need to bere-routed to install downdraft. The countertop must be at least 26" deepwith a flat surface area of 23-1/2" or more, front to back. In addition,other clearances to the front edge of the countertop must be considered,especially on raised bullnose countertops. Consult cabinet and countertopmanufacturer’s specs for flush mount installation prior to install.Installation Information: Before installing, consult installation instructionspacked with product for current dimensional data.KW Rating240V 7.7208V 5.8Breaker Size240V 40 Amps†208V 40 Amps†Listed byUnderwritersLaboratoriesPHP900SMGE Profile™ 30" Electric Induction CooktopDimensions and Installation Information (in inches)Specification Revised 2/103-1/4*Cooktop2-1/2**Required28-1/219-5/829-3/4 21-3/8* Depth of unit at conduit connection location (rear) is6-1/4" on models PP980/975/950/945 and 4-5/8"on models PHP960/900, PP972/962/942/932/912and JP6SS/356/346/340.**Raised bull nose countertops may require up to3/8" additional clearance to prevent interferencewith curved front.Electrical junction box 16" MIN.below countertop30" MIN. tounprotectedcabinetCut shouldnot interferewith cabinetstructureat front2" MIN.clearance toside wallfrom cut-out2" MIN.clearance toside wallfrom cut-out1-3/4" torear wall13" MAX.depth15" MIN.to cabinetAbove illustration intended for dimensional reference only.Refer to photograph for actual product appearance.

/ 2

Related manuals for GE Profile CleanDesign PHP900SM