GE Profile PP975SMSS Dimensions And Installation Information

Also see for PP975SMSS: Installation instructions Owner's manual

For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center ® service,800.626.2000.Listed byUnderwritersLaboratories†Note: Check local codes for required breaker sizeImportant: Requires a 5" free area betweenthe bottom of the cooktop to any combustiblematerial, i.e., shelving. Free area not requiredwhen installing wall oven underneath cooktop.Refer to installation instructions. Requires a15" minimum from cooktop to adjacentoverhead cabinets. Units are furnished witha 48" flexible armored cable.Note: 36" Ribbon cooktops are approved for use over GE 30" Single WallOvens and Warming Drawers only. Refer to cooktop and wall oven/warming drawer installation instructions packed with product forcurrent dimensional data. If installed with a GE Profile™ TelescopicDowndraft System, consult both the cooktop and downdraft installationinstructions packed with product before installing. Cooktop gas/electricsupply may need to be re-routed to install downdraft. The countertopmust be at least 26" deep with a flat surface area of 23-1/2" or more,front to back. In addition, other clearances to the front edge of thecountertop must be considered, especially on raised bullnose countertops.Consult cabinet and countertop manufacturer’s specs for flush mountinstallation prior to install.Installation Information: Before installing, consult installation instructionspacked with product for current dimensional data.KW Rating240V 8.9208V 6.7Breaker Size240V 40 Amps†208V 40 Amps†3-1/4*Cooktop2-1/2**Required33-7/819-1/83636_color_cktp_install20-7/8Electrical junction box 16" MIN.below countertop30" MIN. tounprotectedcabinetCut shouldnot interferewith cabinetstructureat front2" MIN.clearance toside wallfrom cut-out2" MIN.clearance toside wallfrom cut-out1-3/4 " torear wall13" MAX.depth* Depth of unit at conduit connection location (rear) is6-1/4" on models PP980/975/950/945 and 4-5/8"on models PHP960/900, PP972/962/942/932/912and JP6SS/356/346/340.**Raised bull nose countertops may require up to3/8" additional clearance to prevent interferencewith curved front.15" MIN.to cabinet220592Specification Revised 4/09Dimensions and Installation Information (in inches)PP975SMGE Profile™ 36" Built-In CleanDesign Electric Cooktop

/ 2

Related manuals for GE PP975SMSS