GE Profile PSCF3RGX Owner's Manual And Installation

Also see for 25: Owners and installation manual Owner's manual Owner's manual Use and care & installation guide Use and care & installation guide

Contents

About the ice and water dispenser. (on some models) ge.comTo Use the DispenserSelect CUBED, CRUSHED or WATER.Press the glass gently against the topof the dispenser cradle.The spill shelf is not self-draining. To reduce waterspotting, the shelf and its grille should be cleanedregularly.If no water is dispensed when the refrigerator isfirst installed, there may be air in the water linesystem. Press the dispenser arm for at least twominutes to remove trapped air from the water lineand to fill the water system. To flush out impuritiesin the water line, throw away the first six glassfulsof water.CAUTION:Never put fingers or anyother objects into the ice crusher dischargeopening.Locking the DispenserPress the LOCK or LOCK CONTROLS pad for3 seconds to lock the dispenser and control panel.To unlock, press and hold the pad again for3 seconds.Dispenser LightThe LIGHT pad turns the night light inthe dispenser on and off. The light also comes onwhen the dispenser cradle is pressed. On somemodels, if this light burns out, it should be replacedwith a 6-watt, 12V maximum bulb.Door AlarmUse Door Alarm to sound if either door is openfor more than 3 minutes. The alarm will stoponce the door is closed. For LCD models, a popupscreen will appear. The alarm can be silencedby touching the LCD screen.LCD Models:Access By: Home > Options > Information andSettings > Settings > Door AlarmAccess By: Pressing ON.Deactivate By: Pressing OFF.Non-LCD Models:Press the SET FEATURES pad once and DOORALARM will blink. Press ON/OFF and the dooralarm will be set and the icon will turn solid. PressON/OFF again to turn the alarm off.Spill ShelfConsumer SupportTroubleshooting TipsOperating InstructionsSafety Instructions InstallationInstructionsPrecise Fill (on some models)Quick IceThis water dispenser is equipped with a featurecalled “precise fill.” This feature allows you tochoose a precise amount of water (cups orounces) that you would like dispensed. Pintsand Liters are also available for LCD models.LCD ModelsAccess By: Home > Options > Dispenser Options >Precise Fill > Set AmountActivate By: Using the arrow buttons to selectthe desired amount. Press MORE UNITS to selectbetween CUPS, OUNCES, PINTS or LITERS.Non-LCD ModelsPress the PRECISE FILL CUPS/OZ pad.The WATER pad will light and the CRUSHEDand CUBED ice pads will turn off. The last unitused will be displayed.Press the PRECISE FILL pad again to togglebetween cups and ounces.If you selected OUNCES, press the or padto select the number of ounces you would liketo have dispensed between 2–99 ounces.The default is 8 ounces.If you selected CUPS, press the or padto select the amount you would like to havedispensed. They are displayed as 1/4, 1/3, 1/2, 2/3and 3/4, with the highest amount being 16 3/4cups. The default is 1 cup.Press the cup against the cradle and waterwill begin dispensing. It will automatically stopwhen the amount set has been dispensed.The display will show the amount of waterdispensed, beep, then reset after 5 seconds.NOTE: Do not leave the dispenser unattendedwhen water is being dispensed.If you would like to stop dispensing waterbefore the specified amount has beendispensed, just remove the cup from thecradle. The display will show the amount thathas been dispensed for 5 seconds. If the cupswitch is pressed again within that time, thedispenser will continue up to the set amount.If not, the display will return to the setamount.When you need to speed up ice production, usethe Quick Ice feature. While this feature is turned on,the freezer fan runs continuously for 48 hours, oruntil the feature is turned OFF. During this period,ice production will increase up to 40%. Models withthe integrated ice feature system require at FIRSTUSE at least half an 8 oz. glass of ice to be dispensedevery 6 to 12 hours. This will help the icemaker fillthe bucket properly so that dispensing is better.How to UseLCD Models:Access by: Home > Options > Freezer Options >Quick IceActivate by: Pressing ON.Deactivate by: Pressing OFF.Non-LCD Models:Press the SET FEATURES pad twice and QUICK ICEwill blink. Press ON/OFF to turn the feature on,then again to turn it off.15>>>>