GE Profile PT960SM Dimensions And Installation Information

Also see for Profile PT960SM: Brochure Dimensions and installation information

Dimensions and Installation InformationFor answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center ® service,800.626.2000.Listed byUnderwritersLaboratoriesSpecification Created 5/09220136KW Rating240V 9.0208V 6.8Breaker Size240V 40 Amps208V 40 AmpsPT960SPGE Profile™ 30" Built-In Double Convection Wall OvenNote: Cabinets installed adjacent to wall ovensmust have an adhesion spec of at least a 194°Ftemperature rating. Electric wall ovens arenot approved for installation with a plug andreceptacle. They must be hard wired in accordancewith installation instructions.Door handle protrudes 3" from door face. Cabinetsand drawers on adjacent 45° and 90° walls should beplaced to avoid interference with the handle.Installation Information: Before installing, consultinstallation instructions packed with product forcurrent dimensional data.21" minimumDoor OpeningAllowanceBBAACutout height51-13/16" MIN.51-15/16" MAX.Minimum cutout location12" from the floor.Cutout depth23-1/2" MIN547" tobottom ofjunction boxCutout width28-1/2'' MIN.28-5/8'' MAX.21Cabinetwidth 30"CEDMOST 30'' WALL CABINETS CAN BE USED WITH THIS UNIT.THE OPENING BETWEEN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.Conduit48-1/2"Junction boxlocationSuitablebracingto supportrunnersCabinetA – Overlap ofB – Overlap ofOvenC – Overall deD – Overall heOverall heE – Overall wid*Depth includin26-9/10" max.BBAACutout height51-13/16" MIN.51-15/16" MAX.Minimum cutout location12" from the floor.Cutout depth23-1/2" MIN547" tobottom ofjunction boxCutout width28-1/2'' MIN.28-5/8'' MAX.21Cabinetwidth 30"CED' WALL CABINETS CAN BE USED WITH THIS UNIT.EEN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.Conduit(72"long)Junction boxlocationCL 2 x 4 orequivalentrunnersSuitablebracingto supportrunners21-5/8"over centerlineof cabinet(must support 325 lbs.)Cabinet 30"A – Overlap of oven over side of edges of cutout 11/16"-3/4"B – Overlap of oven at top and bottom of cutout 1"OvenC – Overall depth* 23-1/2"D – Overall height with trim 53-3/8"Overall height without trim 52-7/8"E – Overall width 29-3/4"*Depth including door handle is approximately 26-6/10" min. to26-9/10" max.

/ 2

Related manuals for GE Profile PT960SM