GE Pt970 Owner's Manual

Also see for Profile PT970: Installation instructions Brochure Installation instructions Installation instructions Owner's manual

Contents

GE Pt970 Owner's Manual Manual pdf 41 page image

41GEAppliances.comOven RacksClean the oven racks with an abrasive cleanseror steel wool. After cleaning, rinse the rackswith clean water and dry with a clean cloth.Note: Porcelain-coated oven racks may remainin the oven during the self-cleaning cyclewithout being damaged. The shiny, silver-colored oven racks may be cleaned in theself-cleaning oven. However, they will darkenin color, loose their luster and become hard toslide.To make the racks slide more easily, apply asmall amount of vegetable oil or cooking oil toa paper towel and wipe the edges of the ovenracks with the paper towel.Oven rackDo not use a steel wool pad; it will scratchthe surface.To clean the stainless steel surface,use warm sudsy water or a stainless steelcleaner or polish. Always wipe the surface inthe direction of the grain. Follow the cleanerinstructions for cleaning the stainless steelsurface.To inquire about purchasing stainless steelappliance cleaner or polish, or to find thelocation of a dealer nearest you, please call ourtoll-free number:National Parts Center 1.800.626.2002GEAppliances.comStainless Steel Surfaces (on some models)6+2&.25%851+$=$5' Before replacing oven light bulb, disconnect the electricalpower to the oven at the main fuse or circuit breaker panel. Failure to do so may resultin electric shock or burn.WARNING%851+$=$5'7KHJODVVFRYHUDQGEXOEVKRXOGEHUHPRYHGZKHQFRRO7RXFKLQJKRWglass with bare hands or a damp cloth can cause burns.CAUTIONOven Light BulbNOTE: The glass cover should be removed onlywhen cold. Wearing latex gloves may offer abetter grip.Before replacing the bulb, disconnect electricalpower to the oven at the main fuse or circuitbreaker panel. Let the bulb cool completelybefore removing it. For your safety, do nottouch a hot bulb with a damp cloth. If you do,the bulb will break.To remove:Turn the glass cover counterclockwise 1/4turn until the tabs of the glass cover clear thegrooves of the socket. Remove the bulb.To replace:Put in a new 40-watt appliance bulb. Place thetabs of the glass cover into the grooves of thesocket. Turn the glass cover clockwise 1/4 turn.NOTE: A 40-watt appliance bulb is smaller than astandard 40-watt household bulb. Install and tighten the cover clockwise. Reconnect electrical power to the oven. For improved lighting inside the oven, cleanthe glass cover frequently using a wetcloth. This should be done when the oven iscompletely cool.BulbSocketTabMaximumlength31ø2”Glass cover