Temperature LimiterEvery radiant surface unit hasa temperature limiter.The temperature limiter protects the glasscooktop from getting too hot. It is normalfor it to cycle when the cooktop is in use.The temperature limiter may cycle theunits off more frequently for a time if: The pan boils dry. The pan bottom is not flat. The pan is off-center. There is no pan on the unit.Throughout this manual, features and appearance may vary from your model.How to SetPush the knob in and turn in eitherdirection to the setting you want.For glass cooktop surfaces:A HOT COOKTOP indicator light,on the cooktop, will glow when any radiantelement is turned on. It will remain on untilthe surface is cooled to approximately65.6°C (150°F).Indicator light will: Come on when the unit is turned on orhot to the touch. Stay on even after the unit is turned off. Glow until the unit is cooled toapproximately 65.6°C (150°F).At both OFF and HI the control clicksinto position. You may hear slight clickingsounds during cooking, indicating thecontrol is maintaining your desired setting.Be sure you turn the control knob to OFFwhen you finish cooking.Consumer Support Troubleshooting Tips Care and Cleaning OperatingInstructions Safety Instructions10Using the surface units—Knob-controlled models.Dual and Triple Surface Units and Control Knobs (on some models)The surface unit has 2 or 3 cooking sizesto select from so you can match the sizeof the unit to the size of the cookware youare using.On some models.On some models.Models with a Triple Surface Unit only: