GE Quickset III Owner's Manual

Also see for Quickset III: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

Contents

GE Quickset III Owner's Manual Manual pdf 23 page image

GEAppliances.com0seJF®k_2m JHow to Delay the Start of Cleaning (onsomemodels)Make sure the clock shows the correct The display will show the start time. It willtime of day. not be possible to unlatch the oven doorFT] Latch the door.[] Touch the Self Clean pad.[] Using the + or- pads, enterthe desired clean time.[_ Touch the Start Time pad.The earliest start time you can setwill appear in the display.[_ Using the + or- pads, enter the timeof day you want the clean cycle tostart.r_ Touch the Start/On pad.until the temperature drops below the locktemperature.The oven shuts off automatically when theclean cycle is complete, and 0:00 will flashin the display.To Stop a Clean CycleTouch the Clear/Off pad.Wait until the oven has cooled below thelocking temperature to unlatch the door.You will not be able to open the door rightaway unless the oven has cooled belowthe locking temperature.After a Clean CycleYou may notice some white ash in theoven. Wipe it up with a damp cloth afterthe oven cools.If white spots remain, remove them witha soap-filled steel wool pad and rinsethoroughly with a vinegar and watermixture.These deposits are usually a salt residuethat cannot be removed by the clean cycle.If the oven is not clean after one cleancycle, repeat the cycle.You cannot set the oven for cooking untilthe oven is cool enough for the door tobe unlatched.While the oven is self-cleaning, youcan press the Clock pad to display thetime of day. To return to the cleancountdown, press the Self Clean pad.Apply a small amount of vegetable oilto a paper towel and wipe the edges ofthe oven racks with the paper towel. Donot spray with Pam®orother lubricantsprays.23