GE SG 225 User Manual

Also see for SG Series: Installation guide Datasheet Use and care manual Installation guide User manual

Modifications reserved Page 37/79OPM_SGS_USM_M22_M30_2US_V010.doc User Manual SG Series 225 & 300 UL S26.4 SETUPThe SETUP mode is entered any time the “SETUP” button is pressed.This screen allows the user to modify some parameters permitting to adapt some functions of the UPSto his/her needs, described as follows.The LCD will display a series of screens containing the user parameters, accessible without passwordprotection.In this mode the buttons perform the following functions:Return to HOME screen.Scrolls backward to the previous screen.Scrolls forward to the next screen. Confirm selected choice of USER / SERVICE level.Description of the pushbutton to set or modify the parameters:ESC Allows to exit a selected screen without making any modification.U Scrolls backward to the previous line.V Scrolls forward to the next line.Allows to access a value to be set or modified. Select, on the same line, the following value or letter to set or modify.Set or modify the selected value.Save the set or modified value and return to the selected screen.It is possible to view any pushbutton functional description by pushing the button for more than 3seconds.`Home\SetupUPS IDENTIFICATIONID : UPS 0Model : SG Series S2 300S/N : P2300-2010-0001UPS SW Version : xxxDisplay SW Version : xxxUPS identification screenID Number of UPS in the RPA Parallel System (0for single unit).Model UPS model, series number and power rangeS/N The UPS serial number.UPS SW The UPS software version.Display SW The LCD display software version.