DET-882 SecoGear Medium-voltage Switchgear Application and Technical GuideSecoGear Switchgear Concepts and Basic Configurations©2017 General Electric All Rights Reserved 5Rollout ConfigurationsFigure 1-9: Dual RolloutsFigure 1-10: Single RolloutsTable 1-4: Permitted Rollout Unit CombinationsDevice RatingsCompartment A,Single RolloutCompartment A,Dual Rollouts4Compartment B,Single RolloutCompartment B,Dual Rollouts5Upper Lower Upper LowerVT Rollout 5 kV – 15 kV Yes Yes Yes Yes Yes YesCPT Rollout 5 kVA, 10 kVA, 15 kVA Yes Yes No Yes No YesFuse1 Yes3 No No Yes No YesNotes:1. All fuse rollouts are equipped with fuse clips for size C EJ1/EJO1 fuses. Clips can be adjusted for 12” or 15” centers. Fuse rollouts require the installationof a keylock to prevent pulling the drawer out under load.2. A single rollout in compartment A or B can be located in the upper or lower position, as shown in Figure 1-10.3. A fused rollout in compartment A is available as bus connected only.4. The upper rollout in compartment A can be bus connected as long as the lower rollout in compartment A is bus connected. The lower rollout incompartment A can be bus connected, regardless of the connection to the upper rollout in compartment A. The lower rollout in compartment A can beline connected only if the upper rollout in compartment A is also line connected.5. The lower rollout in compartment B can be bus connected as long as the upper rollout in compartment B is bus connected. The lower rollout incompartment B can be line connected, regardless of the connection to the upper rollout in compartment B. The upper rollout in compartment B canonly be line connected if the lower rollout if compartment B is also line connected.CPTFuse RolloutCompartment ACompartment BVTVTUpper RolloutLower RolloutUpper RolloutLower RolloutCompartment ACompartment BVTVT
