CAm Am CLEAN~GKeep your oven clean and sweet- Don’t use sharp-edged utensilssmelling. Opening the oven door a on your oven. The inside andfew minutes after cooking helps air outside oven walls can be scratched.out the inside. An occasional The control panel can be damaged.thorough wiping with a solution ofbaking soda and water keeps the BE CERTAIN POWER IS OFFBEFORE CLEANING ANYinside fresh. PART OF THIS OVEN.How to Clean the InsideWalls and floor. Some spatters can be removed with Metal and plastic parts on door: Wipe frequently witha paper towel, others may require a damp cloth. a damp cloth to remove all soil. DO NOT USERemove greasy spatters with a sudsy cloth, then rinse ABRASIVES, SUCH AS CLEANING POWDERSwith a damp cloth. Do not use abrasive cleaners on OR STEEL AND PLASTIC PADS. THEY WILLoven walls. NEVER USE A COMMERCIAL OVEN MAR THE SURFACE.CLEANER ON ANY PART OF YOURMICROWAVE OVEN. Special note when using Brown ‘N Sear Dish: Ifgrease is present, high heat generated on bottom of aDoor (inside). Window: Wipe up spatters daily and Brown ‘N Sear dish-may cause the grease to burnwash when soiled with a damp cloth. Rinse onto the oven tray. This may be removed with athoroughly and dry. cleanser such as Bon Ami(’) brand cleanser.After using Bon Ami(’) brand cleanser, rinse and drythoroughly, following instructions on can. Do not useBon Ami(”) brand cleanser on the painted surfaces suchas the walls. It may scratch the paint.How to Clean the OukideCase. Clean the outside of your oven with soap anddamp cloth, rinse with a damp cloth and then dry.Wipe the window clean with a damp cloth. Chrometrim is best wiped with a damp cloth and then with adry towel.Control Panel. Wipe with a damp cloth. Drythoroughly. Do not use cleaning sprays, large amountsof soap and water, abrasives or sharp objects on thepanel—they can damage it.Door Surface. When cleaning surfaces of door andoven that come together on closing the door, use onlymild, non-abrasive soaps or detergents applied with asponge or soft cloth.Power Cord. If the cord becomes soiled, unplug andwash with a damp cloth. For stubborn spots, sudsywater may be used, but be certain to rinse with adamp cloth and dry thoroughly before plugging cordinto outlet.29