GE Spacemaker JVM1740DM User Manual

Also see for JVM1740DMBB: Installation instructions Dimensions and installation information

GE Spacemaker JVM1740DM User Manual Manual pdf 33 page image

Light Bulb Replacement1 To replace the bulb(s),first disconnect the powerat the main fuse or circuitbreaker panel or pullthe plug.2 Remove the screw at thefront of the light coverand lower the cover.3 Be sure the bulb(s) to bereplaced are cool beforeremoving. After breakingthe adhesive seal, removethe bulb by gently turning.Replace with the same sizeand type bulb.4 Raise the light shieldand replace the screw.Connect electrical powerto the oven.Replace the burned-outbulb with a 120 volt,40-watt incandescentbulb (WB36X10003),available from yourGE supplier.Cooktop Light1 To replace the oven light,first disconnect the powerat the main fuse or circuitbreaker panel or pullthe plug.2 Remove the top grille bytaking out the 2 screwsthat hold it in place.3 Remove the charcoalfilter (if present) toaccess the light cover(see Remove CharcoalFilter section).4 Remove the light coverlocated near the centerof the oven that holdsthe bulb. After breakingthe adhesive seal,remove the bulb bygently turning. Replacewith the same size andtype bulb.5 Replace the light coverand charcoal filter(if present).6 Replace the grille andscrews. Connect electricalpower to the oven.Replace the burned-outbulb with a 120 volt,40-watt incandescentbulb (WB36X10003),available from yourGE supplier.Oven LightRemove screwScrewsLight cover33