Light Bulb Replacement1 To replace the bulb(s),first disconnect the powerat the main fuse or circuitbreaker panel or pullthe plug.2 Remove the screw at thefront of the light coverand lower the cover.3 Be sure the bulb(s) to bereplaced are cool beforeremoving. After breakingthe adhesive seal, removethe bulb by gently turning.Replace with the same sizeand type bulb.4 Raise the light shieldand replace the screw.Connect electrical powerto the oven.Replace the burned-outbulb with a 120 volt,40-watt incandescentbulb (WB36X10003),available from yourGE supplier.Cooktop Light1 To replace the oven light,first disconnect the powerat the main fuse or circuitbreaker panel or pullthe plug.2 To remove the top grille,open the door andremove the 3 screws ontop of the oven that holdthe grille into place. Slidethe grille to the left toremove it.3 Lift the metal tab on thelight cover located abovethe handle.4 After breaking theadhesive seal, removethe bulb by gentlyturning. Replace withthe same size and typebulb.5 Replace the light cover.6 Replace the grille andscrews. Connect electricalpower to the oven.Replace the burned-outbulb with a 120 volt,40-watt incandescentbulb (WB36X10003),available from yourGE supplier.Oven LightRemove screwScrewsLight cover33Filter housing