GE UVB30 Owner's Manual And Installation Instructions

Also see for UVB30: Owner's Manual & Installation Instructions

Contents

49-80777 9Safety InformationWARNING TO REDUCE THE RISK OFFIRE, ELECTRIC SHOCK OR INJURY TOPERSONS, OBSERVE THE FOLLOWING:• Installation work and electrical wiringmust be done by a qualified person(s) inaccordance with all applicable codes andstandards, including fire-rated construction.• Sufficient air is needed for propercombustion and exhausting of gasesthrough the flue (chimney) of fuel burningequipment to prevent back drafting. Followthe heating equipment manufacturer’sguidelines and safety standards suchas those published by the National FireProtection Association (NFPA), and theAmerican Society for Heating, Refrigerationand Air Conditioning Engineers (ASHRAE),and the local code authorities.• When cutting or drilling into wall or ceiling,do not damage electrical wiring and otherhidden utilities.• Ducted fans must always be vented to theoutdoors.CAUTION TO REDUCE THE RISK OF FIREAND TO PROPERLY EXHAUST AIR, BESURE TO DUCT AIR OUTDOORS. DO NOTVENT EXHAUST AIR INTO SPACES WITHINWALLS OR CEILINGS OR INTO ATTICS,CRAWL SPACES OR GARAGES.WARNING TO REDUCE THE RISK OFFIRE, USE ONLY METAL DUCTWORK.• When applicable, install any makeup(replacement) air system in accordancewith local building code requirements. VisitGEAppliances.com for available makeup airsolutions.• PVC sewer pipe can be used as duct underconcrete slab if allowed by local code board.INSTALLATION INSTRUCTIONS