GE WPRE6100 Technical Service Manual

Also see for PROFILE WASHERS WPRE6100: Owner's manual Owner's manual Owner's manual

– 13 –Estimated Time Remaining Display� Displays the approximate time remaining until the end of the cycle.� If the estimated time remaining is more than 60 minutes, “1H” will flash in the display followed by the additionalremaining minutes. When the time remaining is less than 60 minutes, the timer will count down.� Cycle time is affected by how long it takes the washer to fill. This depends on the water pressure in your home.The “smart” timer “learns” the amount of time it takes to fill your washer and adjusts the total time accordingly.Wash Cycle—Cycle Selector KnobThe wash cycle controls the length of the washing process. The knob can be turned in either direction. Turning the CycleSelector knob after starting a cycle will stop the washer and reset the cycle to the new selection. Press STARTto begin the new cycle selection.The chart below will help you match the wash cycle setting with your clothing. The chart is ranked from longest toshortest cycle time and wash intensity.PREWASH For removing surface dirt from heavily soiled clothes. Make sure to follow with aregular wash cycle.CASUALS For wrinkle-free and permanent press items, and knits.COTTONS For heavy to lightly soiled cottons, household linens, work and play clothes.EASY CARE For wrinkle-free and permanent press items, and knits.DELICATES For lingerie and special-care fabrics with light to normal soil.HAND WASH For items labeled handwashable with light soils. Provides periods of agitation and soakduring wash and rinse.SPEED WASH For lightly soiled items that are needed in a hurry.DRAIN & SPIN For draining the tub and spinning water out of the clothes.STARTPress START to begin the cycle. Pressing START again or raising the lid will PAUSE the cycle and the Cycle indicator lightwill blink.To continue the cycle, press START again or close the lid. If machine is paused more than 24 hours, the cycle will becancelled. To stop the cycle, hold the button for 3 seconds. If water remains in the machine, select the DRAIN & SPINcycle to drain tub and spin water out of the washer tub.DEFhttps://appliancetechmanuals.com