GE WPRE6100 Technical Service Manual

Also see for PROFILE WASHERS WPRE6100: Owner's manual Owner's manual Owner's manual

– 30 –Invert the tub assembly on a protected surfaceand remove the plastic tie that holds the floodhose to the platform.3.(Continued next page)Plastic TieRun the belt off the drive pulley and remove the¾-in. pulley nut.6.Pulley NutDisconnect the mode shifter coil wire harnessfrom the motor.Release the compression tab that attaches themode shifter coil wire harness retainer to thefront of the platform.4.5.Center Coreof PulleyNote: When replacing pulley, tighten pulley nut to275 in. lbs. of torque.Note: In the following step, after removing the pulleynut, it may be helpful to grab the center core of thedrive pulley with one hand and gently tap one of thedrive pulley arms with a hammer. The drive pulleywill “pop” off the tapered shaft.Remove the drive pulley from the shaft andmode shifter assembly.7.RetainerCoil Wire Harnesshttps://appliancetechmanuals.com