WARNING – POTENTIAL FIRE AND SHOCK HAZARD• To reduce the risk of severe injury or death, follow all installation instructions.• Clothes dryer installation must be performed by a qualified installer.• Install the clothes dryer according to these instructions and in accordance with local codes.• This dryer must be exhausted to the outdoors.• Use only 4" rigid metal ducting for exhausting the clothes dryer to the outdoors.• DO NOT install a clothes dryer with flexible plastic ducting materials. If flexible metal (semi-rigid or foil-type) duct is installed,it must be UL-listed and installed in accordance with the instructions found in "Connecting the Dryer to House Vent" on page7 of this manual. Flexible ducting materials are known to collapse, be easily crushed, and trap lint. These conditions willobstruct dryer airflow and increase the risk of fire.• Do not install or store this appliance in any location where it could be exposed to water and/or weather.• Save these instructions. (Installers: Be sure to leave these instructions with the customer.)• This appliance must be properly grounded and installed as described in these instructions.Installation instructions Spacemaker™for your newLaundryWSM2700 ElectricBefore you begin – Read these instructions completely and carefully.IMPORTANT – OBSERVE ALL GOVERNING CODES AND ORDINANCES.Note to Installer – Be sure to leave these instructions with the Consumer.Note to Consumer – Keep these instructions with your Owner’s Manual for future reference.TOOLS NEEDEDIMPORTANT• Exhausting the dryer to the outsideis required to prevent largeamounts of moisture, lint and otherproducts of combustion from beingblown into the room.• Service information and a wiringdiagram are located in the dryeraccess panel.PRODUCT DIMENSIONS751⁄ 2″545⁄ 16″33⁄ 4″27″Drain outlet(rear)Waterinlets (rear)Vent 93⁄ 8″297⁄ 16″411⁄ 4″251⁄ 4″161⁄ 4″21⁄ 2″47″413⁄ 16″117⁄ 16″361⁄ 16″3013⁄ 16″51°49-9038305-09 JRSlip-joint pliersPhillips-head and flat-blade screwdriversRatchet with 3/8″ socketCarpenter’s levelAdjustable wrenches